Gateway Tower User Manual page 19

Component
System label
Power connector
Voltage switch
Kensington™ lock slot
Case cover shipping
screw
Microsoft Certificate of
Authenticity
PS/2 mouse port
PS/2 keyboard port
USB ports
Serial port
Icon Description
Includes your computer's model and serial number. For
more information, see "Identifying your model" on
page 19.
Plug the power cable into this connector.
Before turning on your computer, make sure that this
switch is in the correct position for the correct power
available. The switch is preset at the factory with the
correct voltage for your area.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply should
always be set to this when your computer is operating
in the United States. In other areas of the world, such
as Europe, the utility power is supplied at 230 volts at
50 Hz. If your computer is operating in an environment
such as this, the voltage switch should be moved to 230.
Secure your computer to an object by connecting a
Kensington cable lock to this slot.
Remove this screw before opening the case.
Contains your Windows product key. For more
information, see "Microsoft Certificate of Authenticity" on
page 20.
Plug a Personal System/2
Plug a PS/2 keyboard into this port.
USB 1.1 Plug USB (Universal Serial Bus) devices (such as a USB
Iomega™ Zip™ drive, printer, scanner, camera,
keyboard, or mouse) into these ports. For more
information, see "Installing a printer, scanner, or other
peripheral device" on page 38.
USB 2.0
The rear USB ports may be USB v1.1 or USB v2.0.
Any USB device will work in any USB port.
Plug a serial device (such as a digital camera) into this
port. For more information, see "Installing a printer,
scanner, or other peripheral device" on page 38.
www.gateway.com
Gateway Mid Tower Back
®
(PS/2) mouse into this port.
11