Wheel Bearing Replacement - PEUGEOT Ludix 4T Workshop Manual

MISCELLANEOUS OPERATIONS
- Install the rubber washer (6).
- Fit and finger tighten the nut (7) so that its
notches are aligned with those of the nut.
- Fit the lock washer (8) in the notches of the
locknut and adjustable cone.
- Use the tool ref. 757860 to tighten the
steering locknut (9).
Tightening torque: 70 Nm.
- Refit the other items in the reverse order to
disassembly.

Wheel bearing replacement

- Remove the wheel.
- Use an inertia extractor to remove the
bearings.
- Remove the spacer.
Reassembly
- Use a drift driver to fit the first bearing.
- Fit the spacer.
- Insert the wheel spindle to guide the spacer
with the bearings.
- Use a drift driver to fit the second bearing.
Use new bearings when refitting.
Fit the bearings, pressing against the
outer cage.
36
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
7
6
9
8