PEUGEOT Ludix 4T Workshop Manual page 48

FUEL SYSTEM
Check the condition of the needle valve
and the needle valve seat (A).
Removal of the mixture screw
- Turn clockwise the mixture control screw (1)
while counting the number of turns until it is
screwed home.
When re-fitting, this operation allows
you to put it back to its initial
adjustment position.
Removal of the pick-up pump
- Remove the 2 screws from the sheathing
holder plate.
- Remove the bushing (1) and the protective
rubber (2).
Check the condition of the bushing and
the rubber protection.
- Remove the piston (3).
46
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
1
1
2
3