Installation Of Mobile Two-Way Radio System; Removal Of Ignition Key On Automatic Transaxle Model - Mazda 121 Workshop Manual

CAUTION
G I
CAUTION
INSTALLATION OF MOBILE TWO.WAY RADIO SYSTEM
lf a mobile two-way radio system is installed improperly or if a high-powered
type is used, the EGI system
and other systems may be affected.
When the vehicle is to be equipped with a mobile two-way radio, observe the followlng precaulions:
1. lnstall the antenna al the Jarthest point lrom control units.
2. lnstall the antenna feeder as far as possible from the control unit harnesses (at least 30 cm [11.8 in]).
3. Ensure that the antenna and feeder are properly adjusted.
4. Do not install a high-powered mobile two-way radio system.
05uGlx'013
REMOVAL OF IGNITION KEY ON AUTOMATIC
TRANSAXLE MODEL
The selector lever must be in P (PARK) to turn the ignition key
to the OFF position. lf the switch seems to be off but the key
cannot be removed, the switch may still be in the ACC posi-
tion, or the selector lever may not be in P (PARK). Shift the
selector lever to P (PARK), and turn the ignition key to the
LOCK position. The key should now be lree for removal.
MOBILE TWO.WAY RADIO
"'o'"*'*J
Ll lZ'""-rRoLUN,r
r / r l
FARTHEST POINT
AT LEAST 30 cm (11.8 in)
EGAT CONTFOL UNIT
ENGINE CONTROL UNIT
R
N
D
s
L
03UGIX.OOs
G l - 1 1