Mazda 121 Workshop Manual page 379

TRANSAXLE
J
Oil seal
1. Place the speodometer gear sleeve in a vice.
2. Tap the new oil seal into the speedometer gear sleeve us-
ing a suitable pipe.
Pipe diameter: 15mm {0,59 in)
Folt pln
Install the new roll pin as shown in the figure.
Clulch release fork, clutch releaae colol
Apply grease as shown in the figure.
Clutch lever
1. Apply grease to the bushing.
2. lnstall the clutch lever to the clutch release fork.
Tightening torque:
35-41 Nm (3.6-4.2 m-kg, 26-30 fi-lb)
J-55
1 -
"=