Mazda 121 Workshop Manual page 140

OIL PUMP
Removal Note
A/C compressor (with A/C)
Caution
. Do not damage the hoses.
1 . Remove the A,/C compressor with the hoses still connected.
2. Position the compressor away trom ihe engine and afiix it
with wire.
Sleps After Insiallation
1. Install the oil pan and main bearing support plate
(Reler to page D-8.)
2. Install the timing belt. (Refer to Section B.)
3. Fill with the specified amount and type of engine oil.
(Refer to page D-5.)
4. Connect the negative battery cable.
5. Start the engine and check lor leaks.
6. Check the oil level and add oil if necessary.
orAooxol3
D-10