Disc Info; Edit Track; Cd To Cd Edit - MicroBoards Technology QD-DVD User Manual

Disc Info

The Disc Info function displays information on the type of master disc placed in the TOP reader
drive.
To use the Disc Info function, press the ▼▲ buttons until the display reads:
7. Disc Info
Place the master disc into the TOP reader drive. Press the ENT button. The source is analyzed.
The following screen appears:
Source Disc
(Analyzing)
The following 4 screens display a variety of information about the master disc. The screens are
reached by pressing the ▼▲ buttons.
Total 01 Sessions
Total 01 Tracks

Edit Track

The Edit Track function allows you to select multiple tracks from different master discs and place
them on one Audio CD. The maximum number of tracks that can be written to the CD is 99. In
the Edit Track function, there are three options: CD to CD Edit, Play Audio Track and Close
Session.
The Edit Track functions are not applicable to DVD media.

CD to CD Edit

To use the CD to CD function, press the ▼▲ buttons until the display reads:
8. Edit Track
1. Press the ENT button. The following screen appears:
8-01. Edit Track
CD to CD Edit
2. Place the first master audio CD into the TOP reader drive. Place the blank CD into the
BOTTOM writer drive. Press the ENT button and the following screen appears:
Select Track:
1/16 04:53
3. To select a track that you want to burn to the blank disc, press the ENT button. This will put a
+ symbol in front of that track:
Select Track:
+ 1/16 04:53
4. Press the ▼▲ buttons to scroll through the tracks on that CD, selecting the tracks you wish
to record.
Total: 04:15
Total: 37.0MB
11
Session 01
Track 01 - 01
Track 01
CDXA 37.0MB