Functions; Copy; Test - MicroBoards Technology QD-DVD User Manual

Functions

There are 10 different functions for the QD-DVD duplicator: Copy, Test, Test & Copy, Verify,
Compare, Prescan, Disc Info, Edit Track, Setup, and USB Mode. For the Setup options, please
refer to pages 13-15.

Copy

The Copy function is used to copy your master disc to the blank media. The QD-DVD duplicator
will be in Copy mode when it is turned on. The display will read:
1. Copy
Place your master disc into the TOP DVD reader drive.
Place your blank media into the BOTTOM DVD writer drive.
Press the ENT button on the controller interface.
The data will now be copied to the blank disc.
Copying – 52x 18%
150.4MB 01:15
When the job is completed, the recorded disc will be ejected from the BOTTOM drive.
The display will read:
1.0 Copy
OK: 01
NOTE: CD masters must be copied to CD media, and DVD masters must be copied to
DVD media.

Test

The Test function is used to simulate copying your master disc to the blank media. To use the
Test function, press the ▼ button on the controller until Test is displayed:
2. Test
In Test mode, the blank media will remain blank and can be used again.
Place your master disc into the TOP DVD reader drive.
Place your blank media into the BOTTOM DVD writer drive.
Press the ENT button on the controller interface.
The duplicator will now simulate writing to the blank disc.
Testing – 52x 18%
150.4MB 01:15
When the job is completed, the recordable disc will be ejected from the BOTTOM drive.
The display will read:
2.0 Test
OK: 01
8