Advanced Setup Menu
ENT
11. Advanced Setup
ESC
ESC
ESC
ESC
ESC
Compare Firmware
ESC
ESC
ESC
ESC
Accessing the Advanced Setup Menu
The Advanced Setup menu includes options for the more advanced user. Normally these
functions are not used in the daily operation of the QD-DVD duplicator. If you have any questions
about using these functions, please contact the Microboards technical support department.
To access the Advanced Setup Menu, press and hold the ESC button for three seconds.
UnderRun Protect
The UnderRun Protect feature allows the recorder to use Burn Proof during recording. This
setting defaults to ON and should remain on. This feature protects against making "coasters" or
bad discs. Again, this setting should always remain ON.
ENT
11 -01 Adv Setup
Under Run Protect
Under Run Protect
▼
ENT
11 -02 Adv Setup
Overburn
▼
ENT
11 -03 Adv Setup
Read Error Skip
▼
ENT
11 -04 Adv Setup
Burn- In
▼
ENT
11 -05 Adv Setup
Update F /W T.950
Update Firmware
▼
ENT
11 -06 Adv Setup
▼
ENT
11 -07 Adv Setup
H /W Diagnostics
controller diagnostics
▼
ENT
11 -08 Adv Setup
Load Default
▼
ENT
11 -09
Adv Setup
ISRC & MCN
▼
ENT
11 -10
. Adv Setup
Switch USB Mode
▲
Options are ON or
ON
▼
▲
Overburn
Options are ON or
Off
▼
▲
Read Error Skip
Options are ON or
OFF
▼
▲
Burn-In
Erase & Copy
▼
To M.10Z? YES
YES
NO
Last update F/W
OK!
Runs through
Load Default
Config? YES
YES
NO
▲
Options are ON or
ISRC & MCN
ON
▼
▲
USB L.H Mode
Options are ON or
▼
17
Off
Off
Off
Burn-In
To Be Used by
Test
Service Personnel
ONLY
Firmware is
updated .
Load Default
OK !
Off
Off