Hitachi CP-X2514WN User Manual page 67

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
58
GHOST
Adjust the settings using the ▲/▼ buttons to eliminate ghosting.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for notifying by the message
when to replace the filter unit
100h 200h
After choosing an item except OFF, the message "REMINDER ***
HRS PASSED ...." will appear after the timer reaches the interval
time set by this feature (
When the OFF is chosen, the message will not appear. Utilize this
feature to keep the air filter clean, setting the suitable time according
to your environment of this projector.
• Please take care of the filter unit periodically, even if there is
no message. If the air filter becomes to be blocked by dust or
other matter, the internal temperature will rise, which could cause
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector
and the condition of the filter unit.
KEY LOCK
(1) Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL
(2) Use the ◄/► buttons to select ON or OFF.
ON OFF
Selecting ON in Step 2 locks the buttons except STANDBY/ON on
the operations control selected in Step 1. Selecting OFF releases
the locked buttons on the operations control selected in Step 1.
• Please use this function to prevent tampering or accidental
operation.
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting (
1:NORMAL
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to be
on. If the remote control does not function correctly, disable either of
them.
It's not possible to disable both options at the same time.
Description
500h 1000h 2000h
100).
REMOTE CONTROL
4, 17).
2:HIGH
5000h OFF