Web Control - Hitachi CP-X2514WN User Manual

3. Web Control

3. Web Control
You can adjust or control the projector via a network from a web browser on a
computer that is connected to the same network.
NOTE • Internet Explorer
®
• If JavaScript is disabled in your web browser configuration, you must enable
®
JavaScript in order to use the projector web pages properly. See the Help files
for your web browser for details on how to enable JavaScript
• It is recommended that all web browser updates are installed.
• If data is transferred via wireless and wired LAN at the same time, the projector
may not be able to process the data correctly.
Refer to the following for configuring or controlling the projector via a web browser.
Make sure that your computer and the projector is connected via network, and
then start Web browser.
Enter the projector's IP address into URL input box of the Web browser as the
example below, and then press the Enter key or
Example: If the IP address of the projector is set to 192.168.1.10:
Enter "http://192.168.1.10/" into the address bar of the web browser
and press the Enter key or click
If a correct URL is input, and the projector
and your computer are connected to the
same network correctly, the selection
window as shown on the right will be
displayed.
You can choose to use the Projector
Web Control or Crestron e-Control
a tool for controlling the projector. Click
one of them.
For more details, refer to 3.1 Projector
Web Control (
42).
®
e-Control (
NOTE
• If Crestron e-Control in the Network Settings (
Disable, the selection window above does not appear, but the Logon window of
the Projector Web Control is displayed.
• Crestron e-Control
®
Flash Player on your computer to use Crestron e-Control
16
®
6.0 or later is required.
®
17) or 3.2 Crestron
®
is created using Flash
button.
button.
as
®
. You need to install the Adobe
®
.
21) is set to
®
.
®