Operating; Adjusting The Volume; Temporarily Muting The Sound - Hitachi CP-X2514WN User Manual

Operating

Operating

Adjusting the volume

Use the VOLUME +/VOLUME - buttons to adjust the volume.
1.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after a few seconds.
● When is selected for current picture input port, the volume
adjustment is disabled. Please see AUDIO SOURCE item of AUDIO menu
45).
(
● Even if the projector is in the standby mode, the volume is adjustable when
both of the following conditions are true:
- An option other than
item of the AUDIO menu (
- NORMAL is selected in the STANDBY MODE item of the SETUP menu (
● In the standby mode, the volume of the microphone is adjustable with the
VOLUME +/- buttons on the remote control, in synchronization with the volume
of the projector.

Temporarily muting the sound

Press MUTE button on the remote control.
1.
A dialog will appear on the screen indicating that you have muted
the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after a few seconds.
● When is selected for current picture input port, the sound is always muted.
Please see AUDIO SOURCE item of AUDIO menu (
● C.C. (Closed Caption) is automatically activated when sound is muted and an
input signal containing C.C. is received. This function is available only when
the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPONENT,
COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for
DISPLAY in the C.C. menu under the SCREEN menu (
20
is selected for STANDBY in the AUDIO SOURCE
45).
VOLUME +/- button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH
MAGNIFY FREEZE
ON
OFF
MY BUTTON
KEYSTONE
MUTE button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH
MAGNIFY FREEZE
ON
OFF
MY BUTTON
KEYSTONE
45).
52).
BLANK
PAGE VOLUME
UP
DOWN
MUTE
44).
BLANK
PAGE VOLUME
UP
DOWN
MUTE