Hitachi CP-X2514WN User Manual page 52

Item
AUTO ECO MODE
ECO MODE
MIRROR
(continued on next page)
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON OFF
• When ON is selected, the projector will always be set to Eco mode
at start-up regardless of the ECO MODE (
message "AUTO ECO MODE" will be displayed for tens of seconds
when the projector starts with this function activated.
Using the ▲/▼ buttons turns off/on the Eco mode.
NORMAL ECO
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
• When AUTO ECO MODE (
always be set to Eco mode at start-up regardless this setting.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL H:INVERT
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm (
projector is restarted after the AC power is turned off.
Description
below) setting. An OSD
above) is set to ON, the projector will
V:INVERT H&V:INVERT
77) will be displayed when
SETUP menu
43