Part Names - Hitachi CP-X2514WN User Manual

Introduction

Part names

Projector
(1) Lamp cover (
The lamp unit is inside.
20, 45)
(2) Speaker (
(3) Filter cover (
The air filter and intake vent are inside.
(4) Elevator feet (x2) (
(5) Elevator buttons (x2) (
(6) Remote sensor (
98)
(7) Lens (
(8) Lens cover
(9) Intake vents
(10) Control panel (
(11) FOCUS ring (
(12) ZOOM ring (
(13) AC IN (AC inlet) (
(14) Exhaust vent
(15) Rear panel (
WARNING
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on.
CAUTION
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens except the lens cover of this
projector because it could damage the lens, such as melting the lens.
(continued on next page)
4
94)
96)
23)
23)
17)
5)
23)
23)
15)
5)
►Do not open or remove any portion of the product, unless the
►Do not touch around the lamp cover and the exhaust
(9)
(4)
(8)
(10)
(15)
(11) (12)
(7)
(3)
(4)
(14)
(2)
(6)
(5)
(1)
(5)
(13)