Arrangement - Hitachi CP-X2514WN User Manual

Arrangement

Refer to tables T-1 and T-2 at the back of this manual as well as the following to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
WARNING ►Install the projector where you can access the power outlet
easily.
►Install the projector in a stable horizontal position.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand. Specific mounting accessories and services may be required.
• Do not put the projector on its side, front or rear position.
• Do not attach nor place anything on the projector unless otherwise specified
in the manual.
►Do not install the projector near thermally conductive or flammable things.
►Do not place the projector where any oils, such as cooking or machine oil, are
used.
►Do not place the projector in a place where it may get wet.
CAUTION ►Place the projector in a cool place with sufficient ventilation.
• Keep a space of 30 cm or more between a side of the projector and other
objects such as walls.
• Do not stop up, block nor cover the projector's vent holes.
• Do not place the projector at places that are exposed to magnetic fields, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector near humidifiers.
NOTICE ►Position the projector to prevent light from directly hitting the
projector's remote sensor.
►Do not place the product in a place where radio interference may be caused.
►Check and correct the setting for FAN SPEED of SERVICE in the OPTION
menu according to the usage environment. For details, see User's Manual -
Operating Guide.
6
Ⓗ × Ⓥ : Screen size
ⓐ : Projection distance
Projector top
ⓑ , ⓒ : Screen height
Projector bottom
(from the projector's end)