Set Label Attributes
Creating Auto-Sized Label
Set Label Attributes
Creating Fixed-Length Label
Creating Auto-Sized Label
3-4
Use this procedure to create a label where the continuous-media label length is
set, not variable. Once selected, the printable area shown on the label is reduced
by the amount of the leader/trailer required for the installed supply, so that the total
label length output matches the selected length.
Note: The label size for die-cut media is already set and cannot be adjusted.
To create a fixed-length label:
1. From the Home page, select Menu
2. In the menu list, select Size & Orientation
Note: You can also access the Label Size & Orientation box by touching the
Label Size text at the bottom of the screen.
3. On the Label Size & Orientation dialog box, select Fixed Length
4. In the Length field, enter the desired label length.
Note: Minimum supported length is 0.5 in. (12.7 mm). Maximum supported
length is 120 in. (3048 mm).
5. Select OK. The Status Bar indicates the new label length.
Use this procedure to create a label where the continuous-media label length
adjusts to fit the data that you add to the label (variable label length).
Note: The label size for die-cut media is already set and cannot be adjusted.
To create an auto-sized label:
1. From the Home page, select Menu
2. In the menu list, select Size & Orientation
3. Select Autosize to Fit Data
will automatically be adjusted to fit the data.
4. Select OK
.
.
.
.
.
. When entering data, the label size
®
BBP
31 Sign & Label Printer User's Manual
.