Connectors
All cables are connected to the connector panel on the lower rear of the printer.
• Interface connector:
• Power supply connector:
For details on how to connect the interface connector and the power supply connector, see
"Connecting the Printer to the Host Computer" on page 40
Supply Unit (PS-180)" on page
Offline
The printer automatically goes offline under the following conditions:
• Between the power is turned on (including the printer reset through the interface) and when
the printer is ready to receive data.
• During a self-test.
• During offline with the On/Off Line button.
• When in menu mode.
• When an unrecoverable error has occurred.
16
Ethernet
Power supply connector
Connects the printer with the host computer interface.
The interface type differs depending on the model. (See
"Interfaces" on page
Connects the power supply unit.
43.
Interface connectors
USB
Serial (9-Pin D-Sub)
Serial
(25-Pin D-Sub)
12.)
and
"Connecting the Power