For Ethernet Interface
Connect the printer to a network by a LAN cable via a hub.
When LAN cables are installed outdoors, make sure devices without proper surge
CAUTION
Never attempt to connect the customer display cable, drawer kick-out cable, or a
For Ethernet interface communication settings, use TM-L500A Utility or EPSON TMNet
WinConfig utility. For detailed information about the setting methods, see the TM-L500A
Utility User's Manual or EPSON TM Net WinConfig User's Guide.
Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the
connector clicks into place.
42
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
standard telephone line cable to the 10/100BASE-T LAN connector.