Epson TM-L500A RFID Technical Reference Manual page 49

AEA error judgement for wrong coupon type
• AEA error
• No AEA error (initial setting)
Font compatible mode
• PECTAB-compliant font
• IER506-compatible font (initial setting)
Truncate function
• Does not truncate
• Truncates (no error) (initial setting)
• Truncates (error)
Transmission conditions for serial interface
Transmission speed
When DIP switches 3 and 4 are set to ON, the value (initially 19200 bps) can be set to 2400, 4800,
9600, 19200, 38400, 57600, or 115200 bps. (See
38.)
The transmission speed can be set with DIP switches 3 and 4 (See
(DIP Switches 3/4)" on page
to ON, the setting with the memory switch is enabled.
Parity bit
• None (initial setting)
• Odd
• Even
Flow control
• RTS/CTS control (initial setting)
• DTR/DSR control
"Transmission Speed (DIP Switches 3/4)" on page
38.) or the memory switch. When DIP switches 3 and 4 are set
Chapter 2 Setup
"Transmission Speed
49
2