Connectors; Paper Ejection Tray - Epson TM-C3400 Technical Reference Manual

INK (ink) LED: Red
• Flashes when the ink is low or waste ink in the ink cartridge is nearly full.
• Lights when it is time to replace the ink cartridge, when the ink cartridge is not installed or is
not correctly installed, and when waste ink in the ink cartridge is full.
• Lights off when ink in the ink cartridge is adequate.
PAPER (paper out) LED: Red
• Lights when the paper is not installed or is not correctly installed.
• Lights off when the paper is correctly installed.
• The INK LED does not flash even if the ink is low when the "LED Notification Setting at
• The printer status is also displayed with combination of lighting and flashing of LED's.

Connectors

All cables are connected to the connector on the lower rear of the printer.
• Power supply connector: Connects cable of the AC adapter. The AC adapter itself is installed
• USB Connector:
• Inlet (AC Adapter):
For details how to connect the interface and power supply connector, see
Printer to the Host Computer" on page

Paper ejection tray

Installing the paper ejection tray enables you to accumulate printed paper temporarily in it.
• For how to attach the paper ejection tray, see
• For maximum capacity for ejected paper of the paper ejection tray, see
Paper may fall from the paper ejection tray due to a curl or the length of the paper.
20
Ink Low" is set not to appear on [Notification Settings] on [Maintenance And Utilities] tab
of the printer driver.
See "Status/Error Indications" on page 21
at factory before shipping.
Connects the printer with the host computer via interface.
Connects the AC cable.
Tray" on page 96.
Tray" on page 50.
for details.
65.
"Attaching/Adjusting the Paper Ejection
"Connecting the
"Paper Ejection