Dodge challenger 2016 User Manual page 165

W H A T T O D O I N E M E R G E N C I E S
1. Remove the spare tire, jack, and lug wrench.
NOTE:
For SRT model the spare tire must be used for the rear wheel(s) only. For a flat front tire,
move the rear tire to the front and use the spare tire on the rear.
2. If equipped with aluminum wheels
where the center cap covers the lug
nuts, use the lug wrench to pry the
center cap off carefully before raising
the vehicle.
3. Before raising the vehicle, use the lug
wrench to loosen, but not remove, the lug nuts on the wheel with the flat tire. Turn the
lug nuts counterclockwise one turn while the wheel is still on the ground.
4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle with the lift area of the sill flange.
NOTE:
If the vehicle is too low for jack placement, slide the jack on its side and rotate it up
into position.
Spare Tire Label (SRT Only)
Front Jacking Location
163