Dodge challenger 2016 User Manual page 149

1/4 Mile Duration
When selected, this screen displays the time it takes the vehicle to travel 1/4 mile within
25 seconds and the vehicle's speed when it reaches 1/4 mile.
• The feature will "ready" when the vehicle is at 0 mph (0 km/h). The word "READY" will
flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 1/4 mile in less then 25 seconds.
• The time and speed will continue to display until the OK button is pushed.
• Pushing the OK button will clear the current run and display the vehicle's best 1/4 mile
run.
• To clear the vehicle's best 1/4 mile run, push and hold the OK button for five seconds.
Braking Distance
When selected, this screen displays the vehicle's braking distance and the speed at which
the brake pedal was depressed.
• This feature will only function when applying the brakes at speeds above 30 mph
(48 km/h).
• Engaging the parking brake will disable this feature.
• The word "READY" will display when conditions are met for the event to begin.
• The distance and speed measurements display while the event is taking place.
• The distance measurement will be aborted if the brake pedal is released before the
vehicle comes to a complete stop.
• The distance and speed measurements will continue to display until the OK button is
pushed.
• Pushing the OK button will clear the current run and prepare the cluster to record a new
run.
Current G-Force
• When selected, this screen displays the current G-Force (lateral and longitudinal) along
with a friction circle that displays the directions of the forces.
Peak G-Force
When selected, this screen displays all four G-Force values (two lateral and two longitu-
dinal).
• When a force greater than zero is measured, the display will update the value as it
climbs. As the G-Force falls, the peak forces will continue to display.
• Pushing the OK button will clear the peak force values.
S R T
147