Dodge challenger 2016 User Manual page 140

E L E C T R O N I C S
Braking Distance
When selected, this screen displays the vehicle's braking distance, and the speed at which
the brake pedal was pushed.
• This feature will only function when applying the brakes at speeds above 30 mph
(48 km/h).
• Engaging the parking brake will disable this feature.
• The word "READY" will display when conditions are met for the event to begin.
• The distance and speed measurements display while the event is taking place.
• The distance measurement will be aborted if the brake pedal is released before the
vehicle comes to a complete stop.
• Pushing and holding the OK button will clear the current and last run values.
Current G-Force
When selected, this screen displays the current G-Force (lateral and longitudinal) that
displays the directions of the forces.
Peak G-Force
When selected, this screen displays all four G-Force values (two lateral and two longitudinal).
• When a force greater than zero is measured, the display will update the value as it
climbs. As the G-Force falls, the peak forces will continue to display.
• Push and hold the OK button to clear the peak force values.
Lap Timer
When selected, the Lap Timer page will show the timer always at 0:00.00 with the
previous Best and Last time data (unless the driver has cleared it via hold to Reset).
• Pushing OK will start "current" timer from 0:00.0.
• When OK is pushed, the times are updated accordingly.
• As soon as the driver exits the Lap Timer pages, the "current" timer will stop and the
time will be reset to 0:00.00.
• If the driver stays on the Lap Timer pages, the "current" timer will reset to 0:00.0 when
ignition is placed in the off position, or ignition placed in the ON position (or will roll
over at 59:59.99 if ever possible).
• Each time the driver pushes OK for a Lap that current time populates, the Last time and
also populates the 1st (top) space on the Timer History page the current time resets to
0:00.0 at every push of the OK button.
• The timer will stop when the driver navigates away from this page.
Lap History
When selected, this screen displays the Lap History, and will color highlight the time that
is the best time from the Timer Page.
• Each time the driver pushes the OK button (while on the Lap Timer page) the current
Lap Time populates the 1st spot and the rest of the data shifts down.
138