Dodge challenger 2016 User Manual page 158

W H A T T O D O I N E M E R G E N C I E S
• Push and release the DOWN
menu to "Vehicle Info."
• Push and release the RIGHT
• Push and hold the RIGHT
screen.
• Push and hold the DOWN
• Push and release the UP
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to the ON/RUN position (Do not
start the engine).
• Push and release the DOWN
menu to "Vehicle Info."
• Push and release the RIGHT
• Push and hold the RIGHT
screen.
• Push and hold the DOWN
• Push and release the UP
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
Resetting The Light After Servicing
Vehicles Equipped With Keyless Enter-N-Go
1. Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Without pushing the brake pedal, push the ENGINE START/STOP button once to
return the ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition switch to the ON/RUN position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:
• If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
• Resetting the oil life can also be done within the "Oil Life" menu under "Vehicle Info."
156
arrow button to scroll downward through the main
arrow button to access the "Oil Life" screen.
arrow button for one second to access the "Oil Life Reset"
arrow button until the screen shows 100% oil life.
arrow button to exit the DID screen.
arrow button to scroll downward through the main
arrow button to access the "Oil Life" screen.
arrow button for one second to access the "Oil Life Reset"
arrow button until the screen shows 100% oil life.
arrow button to exit the DID screen.