Table of Contents
Advertisement
System Log
The WBR-6603 supports both Syslog (using UDP packets) and E-Mail alert.
It support two methods to export system logs to specific destination by means of syslog (UDP) and E-
mail (TCP). The items you have to setup including:
Syslog setting:
For Syslog, you will need to enter the IP address of the host computer that will be receiving the
syslog messages and tick on Enable.
E-mail alert:
For E-Mail alert, you will need to define the following:
• E-Mail Alert: Tick Enable to enable this feature.
• SMTP Server IP and Port: Enter the IP address and port of the SMTP server, separated by ":"
(no quotes). If you do not specify the port number, the default value of 25 will be used.
• E-Mail addresses: Enter the e-mail addresses of the recipients for the email logs. To assign
more than one recipient, use ";" or "," (no quotes) to separate the e-mail addresses.
• E-Mail Subject: Enter the subject for the e-mail (optional)
• User Name / Password: Username and Password if your SMTP server requires log in.
56
Advertisement
Table of Contents
