Table of Contents
Advertisement
B. Ethernet Over ATM with Dynamic IP Address
1. LAN IP Address: The local IP address of this device. The computer on your network must use the LAN IP
address of this device as their Default Gateway. You can change it if necessary.
2. Host Name: The name that shown on client list at server side.
3. WAN's MAC Address: You can manually setup the WAN's MAC address by clicking the Clone MAC button.
4. Renew IP Forever: This feature allows this product renew IP address automatically when the lease time is
being expired even the system is in idle state.
5. IGMP: If you enable this option, the device would allow IGMP packet pass through.
6. Data Encapsulation: Vc-MUX and LLC, these two options depend on your ISP setting.
7. VPI and VCI, Schedule Type: these values depend on your ISP setting.
21
Advertisement
Table of Contents
