Table of Contents
Advertisement
Wireless Settings
Wireless: Enabled by default. Disabling this feature will turn off the wireless function of this unit.
Network ID (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local
area network (WLAN). The SSID's factory default setting is LevelOne. The SSID can be easily
changed to establish a new wireless network.
Note: SSID names may contain up to 32 ASCII characters.
Wireless Mode: You can choose the wireless mode to IEEE 802.11b/g/n Mixed mode, b/g Mixed
mode, g/n Mixed mode, IEEE 802.11b only, IEEE 802.11g only, or IEEE 802.11n only
.
SSID Broadcast: The WBR-6603 will broadcast beacons that contains SSID and other wireless
information so that Computers or other wireless devices can find the WBR-6603 when scanning for
wireless networks. Disable this function if you want to hide your wireless network.
28
Advertisement
Table of Contents
