Preparing Your Printer
5
Install the SD memory card (4) into the
1
SD memory card socket (5).
6
Install the SD memory socket to the
printer with the screw (6) and tab (7) for
the SD memory card socket and attach
the connector (8).
6
7
Install the metal plate (2).
(1)
First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
➊
4
5
8
7
2
➋
- 28 -
(2)
While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
➋
8
Close the access cover (1).
9
Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
10
Press the <ENTER> button on the
operator panel.
11
Check that [Configuration] is selected
and press the <ENTER> button.
2
➊
1