Page 2
Final Assembly ......... . 3 *Note: Refer also to the instructions included with the aftermarket radio. 95-7332...
Page 3
Unplug the hazard switch and remove the panel. (Figure A) Remove (4) Phillips screws securing the blank plate/pocket covering the radio cavity and remove the plate. (Figure B) Continue to kit assembly. 95-7332 DASH DISASSEMBLY...
Page 4
Double DIN trim plate. (Figure A) Slide the Double DIN or stacked ISO mount unit(s)into the bracket/trim plate assembly and secure the unit(s) to the assembly using the screws supplied with the unit(s). (Figure B) Continue to final assembly. 95-7332 KIT ASSEMBLY...
Page 5
Dimmer ....Orange / White *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 95-7332 FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together...