Download Print this page

Metra Electronics 95-7325 Installation Instructions Manual

Car radio kit

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS FOR PART 95-7325
Hyundai Santa Fe
95-7325
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Units Provision
KIT COMPONENTS
A) Double DIN Trim Plate B) Double DIN Brackets
A
Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
2007-10
(excludes 2010 NAV models)
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7302 - Hyundai Harness 2007-up
• 70-7305 - Hyundai / KiA Harness 2009
Antenna Adapter:
B
• 40-KI11 - 2009-10 Santa Fe Adapter
TOOLS REQUIRED:
• Phillips Screwdriver
www.metraonline.com

Advertisement

loading

Summary of Contents for Metra Electronics 95-7325

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7325 Hyundai Santa Fe (excludes 2010 NAV models) 95-7325 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Units Provision KIT COMPONENTS A) Double DIN Trim Plate B) Double DIN Brackets Small Flat Blade Screwdriver • Panel Removal Tool 1-800-221-0932 ©...
  • Page 2 Final Assembly ......... . 4 *Note: Refer also to the instructions included with the aftermarket radio. 95-7325...
  • Page 3: Hyundai Santa Fe 2007-10

    (Figure C) Remove (2) Phillips screws then unclip and remove the panel sur- rounding the radio including the a/c vents. (Figure D) Remove (4) Phillips screws securing the radio. Unplug and remove radio. Continue to kit assembly. 95-7325 DASH DISASSEMBLY...
  • Page 4: Kit Assembly

    Double DIN trim plate. (Figure A) Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure B) Continue to final assembly. 95-7325 KIT ASSEMBLY...
  • Page 5: Stacked Iso Units Provision

    Double DIN trim plate. (Figure A) Slide the stacked ISO units into the bracket/trim plate assembly and secure the units to the assembly using the screws supplied with the units. (Figure B) Continue to final assembly. 95-7325 KIT ASSEMBLY...
  • Page 6: Final Assembly

    Dimmer ....Orange / White *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 95-7325 FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together...
  • Page 7 95-7325 NOTES...
  • Page 8 95-7325 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 04/27/10 © COPYRIGHT 2004 METRA ELECTRONICS CORPORATION INST95-7325...