Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 95-7861
APPLICATIONS
Honda Pilot
•2003-2005
•2006-2008
(Without Factory Navigation)
95-7861
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
KIT COMPONENTS
A) "LX" Double DIN Trim Plate B) "EX" Double DIN Trim Plate C) Double DIN Brackets
C
A
B
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ • Panel Removal Tool
• Phillips Screwdriver • Socket Set
www.metraonline.com
1-800-221-0932
© COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION
Advertisement
Related Manuals for Metra Electronics 95-7861
Summary of Contents for Metra Electronics 95-7861
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-7861 APPLICATIONS Honda Pilot •2003-2005 •2006-2008 (Without Factory Navigation) 95-7861 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision KIT COMPONENTS A) “LX” Double DIN Trim Plate B) “EX” Double DIN Trim Plate C) Double DIN Brackets TOOLS REQUIRED: Small Flat Blade Screwdriver/ •...
-
Page 2: Table Of Contents
Final Assembly ......... . 5 *Note: Refer also to the instructions included with the aftermarket radio. 95-7861 (Without Factory Navigation) ....2... -
Page 3: Honda Pilot 2003-2005
(Figure A) Unsnap radio trim panel. Unplug switches and remove panel. (Figure B) Remove (4) 10mm bolts securing radio, unplug and remove radio. (Figure C) Continue to kit assembly. 95-7861 DASH DISASSEMBL Y... -
Page 4: Honda Pilot 2006-2008 (Without Factory Navigation)
(Figure B) Unclip the radio trim panel. Unplug and remove the panel. (Figure C) Remove the (4) screws securing the radio. Unplug and remove the radio. (Figure D) Continue to kit assembly. 95-7861 DASH DISASSEMBL Y (Without Factory Navigation) -
Page 5: Din Radio Provision
Double DIN trim plate. (Figure A) Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure B) Continue to final assembly. 95-7861 KIT ASSEMBL Y... -
Page 6: Iso Radio Provision
Double DIN trim plate. (Figure A) Slide the stacked ISO units into the bracket/trim plate assembly and secure the units to the assembly using the screws sup- plied with the units. (Figure B) Continue to final assembly. 95-7861 KIT ASSEMBL Y... -
Page 7: Final Assembly
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 95-7861 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together... - Page 8 95-7861 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 05/29/08 © COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION INST95-7861...