Advertisement
DIN HEAD UNIT PROVISION WITH POCKET
1
Snap the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(Figure A)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
3
Snap radio assembly into factory
radio opening.
4
Slide the aftermarket radio into the
cage and secure. (Figure B)
5
Snap the pocket into the Radio
Housing until secure. (Figure C)
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal
99-9107B
2
KIT ASSEMBL Y
A
B
C
Advertisement
