Mx-Amx2 (Application Communication Module); Unpacking; Installation - Sharp MX-B381 Installation Manual

[10] MX-AMX2 (APPLICATION MX-B401
COMMUNICATION MODULE)

1. Unpacking

A. Check the packed items
1
No. Packed part names
1 CD-ROM
2 Operation manual

2. Installation

<Note before installation>
* To enable the external account kit, the product key must be
acquired.
A. Make preparations for enabling the Application
Communication Module
To enable the Application Communication Module, enter the prod-
uct key by key operations on the operation panel.
1) Press the [SYSTEM SETTINGS] key.
2) Touch the [Admin Password] key.
3) Touch the [Password] key and enter the administrator pass-
word.
4) Touch the [OK] key.
5) Touch the [Product Key] key.
You may have to scroll down the screen to show this key.
6) Touch the [Application Communication Module] key.
7) Enter the product key with the 10-key, and touch [OK] key.
• The product key can be entered from the Web page.
For details, refer to [HELP] on the right upper side of the Web
page.
B. OSA Settings
1) By performing procedure A, "OSA setting" key is added to the
menu screen of the system setting or the key operator pro-
gram.
MX-B381/B401 MX-AMX2 (APPLICATION COMMUNICATION MODULE) 10 – 1
2
Quantity
1
1
Service Manual 2) When "OSA setting" key is touched, the menu below is dis-
played.
3) When the [Default Display Setting] key is touched, the screen
for setting the default display that appears when the [DOCU-
MENT FILING] key is pressed will appear.
• To set the base screen of document filing as the default dis-
play, touch the [Document Filing] key.
• To set the external application selection screen as the
default display, touch the [OSA] key.
4) After selecting the setting, touch the [OK] key.
• "Default Display Setting" also appears in "Document Filing
Settings" in the system settings (administrator).
• If the [CA] key is pressed in document filing mode or OSA
mode, the base screen of that mode will appear regardless
of the default display setting.
C. External application setup
1) Click the [Login] button that appears in the upper right-hand
corner of the Web page.
2) Select [Administrator] in [Login Name] and then enter your
password.
3) Click [External Applications Setup] in the menu frame.
4) Configure the standard application settings.
• Up to 8 standard applications can be stored.
• For each setting item, refer to [Help].