Mx-Fn12 (Finisher); Mx-Fn12 (Finisher) Unpacking - Sharp MX-B381 Installation Manual

[3] MX-FN12 (FINISHER)

MX-B401
1. Unpacking
A. Removal of the finisher
B. Removal of the fixing tape and protection
material
1) Remove the finisher from the polyethylene bag, and remove
the fixing tape and the protection materials.
C. Check the packed items
1
3
No. Packed part names
1 Machine connection unit
2 Paper exit tray
3 Staple position label (For RSPF)
4 Staple position label (For OC)
2.
Service Manual
<Precautions for installation>
Before execution of installation, check to confirm that the communi-
cation lamp on the operation panel and the data lamp under it are
not lighted or blinking.
A. Turn off the power of the main unit
1)
2)
3)
2
4
Quantity
1
1
1
1
MX-B381/B401 MX-FN12 (FINISHER) 3 – 1
Installation
Turn OFF the power switch on the operation panel.
Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
Disconnect the power plug from the power outlet.