Installation - Sharp MX-B381 Installation Manual

B. Installation of the machine connection unit
1) Remove the full detection actuator and the paper exit auxiliary
plate at the paper exit port of the main unit.
2) Disengage the pawls, and remove the paper exit cover.
3) Open the front cover.
4) Remove the coin screw, and remove the paper exit tray.
5)
6)
C. Installation of the finisher
1)
2)
MX-B381/B401 MX-FN12 (FINISHER) 3 – 2
Install the machine connection unit (included in the package)
to the machine.
Slide the lock lever to " (Lock)" position and fix it.
Install the finisher to the machine connection unit.
NOTE: When holding the finisher, hold the front frame side and
the rear frame side together.
Close the front cover of the finisher.