Dehumidifier Heater Kit (Service Parts) For The Mx-Csx1/Csx2; Heater Kit Contents List; Installation - Sharp MX-B381 Installation Manual

[14] DEHUMIDIFIER HEATER KIT (SERVICE PARTS) FOR THE MX-CSX1/ MX-B401
CSX2

1. Heater kit contents list

No. Part Name
1 Desk dehumidifier heater unit
2 PWB supporter (KGLS-3S)
3 Mini clamp (UAMS-07-0)
4 Heater interface PWB
5 M4 x 10P tight screw
6 WH desk I/F harness
7 WH Frontier I/F harness
8 Snap band

2. Installation

<Note before installation>
• Confirm that the line and data indicator (below) on the operation
panel are not lite or blinking. Then turn off machine.
• The dehumidifier heater kit for the MX-CSX1/CSX2 cannot be
installed without the main unit dehumidifier kit.
Be sure to install the dehumidifier heater kit for the main unit first,
and then install the dehumidifier heater kit for the MX-CSX1/
CSX2.
• After completion of the procedure in item G of the installation pro-
cedures of the dehumidifier heater kit for the main unit, perform
the following procedures.
A. Desk cabinet removal
* The descriptions are made on the MX-CSX1. If the MX-CSX2 is
also installed, perform the same procedures for the MX-CSX2.
1) Pull out the paper tray, and loosen the hand screw which is on
the left side when viewed from the front.
MX-B381/B401 DEHUMIDIFIER HEATER KIT (SERVICE PARTS) FOR THE MX-CSX1/CSX2 14 – 1
Service Manual
DKIT-0418FCZZ
120V series
Part code Qty.
CHLDZ2043FC51 1
LBSHZ2029SCZZ 4
LHLDW0734FCZZ 2
CPWBF1862FC31 1
XEBS740P10000 4
DHAI-4383FCPZ 2
DHAI-4382FCPZ 1
LBNDJ0043FCZ1 1
2)
3)
4)
DKIT-0419FCZZ
127V series
Part code Qty.
CHLDZ2043FC52 1
LBSHZ2029SCZZ 4
LHLDW0734FCZZ 2
CPWBF1862FC31 1
XEBS740P10000 4
DHAI-4383FCPZ 2
DHAI-4382FCPZ 1
LBNDJ0043FCZ1 1
Slide the desk left cabinet to the front side.
Remove a screw.
Open the desk right side cabinet.
DKIT-0420FCZZ
230V series
Part code Qty.
CHLDZ2043FC53 1
LBSHZ2029SCZZ 4
LHLDW0734FCZZ 2
CPWBF1862FC31 1
XEBS740P10000 4
DHAI-4383FCPZ 2
DHAI-4382FCPZ 1
LBNDJ0043FCZ1 1