Panasonic KX-TDA50 Feature Manual page 61

Conditions
•
Only PTs, PSs, and SLTs that are permitted by COS programming can originate conference group calls.
•
Conference Group Call Control features are unavailable if an SLT is used to initiate the call.
•
Users of PSs other than the KX-WT125/KX-WT126 may be able to enable the automatic answering of calls
for this feature by changing their PS's settings. For details, refer to the operating instructions of the PS.
•
The announcement is established when the first telephone to automatically answer goes off-hook, or if no
telephones automatically answer, when a called member answers the call.
•
If no extensions automatically answer, and no members answer the call within the preprogrammed time
limit, the caller will hear a busy tone.
•
The caller will hear a confirmation tone every time a called extension answers the call.
•
When the originating caller of a conference group call goes on-hook, the call ends and all participating
members will be disconnected.
•
The conference group call will reach a member extension regardless of settings such as Call Forwarding
(except DND).
•
If a member extension is busy and has Call Waiting for CO line calls activated when a conference group
call is made, a call waiting tone will be sent to the extension.
•
If a member extension is busy when a conference group call is made, and the member goes on-hook while
the conference group call is still ringing, a PT will ring instead of automatically answering the call. A
KX-WT125/KX-WT126 PS will automatically answer the call.
•
The call information of the caller (not members) will be recorded on SMDR.
•
A caller cannot make a conference group call with a call on hold.
•
Call Pickup is not available for a conference group call. (® 3.1.6 Call Pickup)
•
The conference group call will not reach members when:
–
the member extension has set DND for intercom calls.
–
the member extension is a PS in Wireless XDP Parallel Mode. (® 20.1.4 Wireless XDP Parallel
Mode)
•
If 7 members of a Conference Group Call already have the ability to speak enabled, other users cannot
press a dial key to enable their ability to speak.
•
If a member presses a dial key to enable the ability to speak during a Conference Group Call, the member
cannot disable this ability. They can mute their microphone manually, or the originator of the call can use
conference group call control to disable their ability to speak.
•
Since each PS requires one wireless channel, note your PBX's wireless capacity when assigning multiple
PSs to a conference group.
PC Programming Manual References
4.4 [2-3] Timers & Counters—Miscellaneous—
4.8 [2-6-1] Numbering Plan—Main—Features—
4.11 [2-7-1] Class of Service—COS Settings—Miscellaneous (KX-TDA50 only)—
Operation
5.26 [3-10] Conference Group (KX-TDA50 only)
5.27 [3-10] Conference Group—Member List (KX-TDA50 only)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
1.3.17 Conference Group Call (KX-TDA50 only)
Document Version 2010-11
3.1.17 Conference Group Call (KX-TDA50 only)
Conference Group Call—Ring Duration (KX-TDA50 only)
Conference Group Call Operation (KX-TDA50 only)
Conference Group Call
Feature Manual 61