Flexible Buttons; Flash/Recall/Terminate - Panasonic KX-TDA50 Feature Manual

6.1.3 Flexible Buttons

Description
You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs through either system or personal programming. They can then be used to make or receive
intercom or CO line calls or be used as feature buttons, as follows:
[Button Usage]
Button
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Direct Station Selection (DSS)
Network Direct Station Selection
(NDSS)
One-touch Dialing
Incoming Call Distribution (ICD)
Group
Message
FWD/DND (External/Internal/
Both)
*1
Group FWD (External/Internal/
Both)
Account Code Entry (Account)
Conference
Terminate
External Feature Access (EFA)
Call Park
Document Version 2010-11
Used to access a specified CO line for making or receiving calls.
(® 3.1.14 CO Line Access)
Used to access an idle CO line in a specified trunk group for making
calls. Incoming calls from CO lines in the assigned trunk group arrive
at this button. (® 3.1.14 CO Line Access)
Used to access an idle CO line for making calls. Incoming calls from
any CO line arrive at this button. (® 3.1.14 CO Line Access)
Used to call an extension with a one-touch operation. (®
9.1.13 Intercom Call)
Used to access an extension at another PBX within the same
network. (® 13.1.15 Private Network Features—NDSS (Network
Direct Station Selection))
Used to call a preprogrammed party or access a feature with a
one-touch operation. (® 12.1.4 One-touch Dialing)
Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (® 9.1.1 ICD GROUP FEATURES)
Used to leave a Message Waiting indication or call back the party
who left the Message Waiting indication. (® 11.1.3 Message
Waiting)
Used to set the FWD or DND feature for the extension. The feature
is applied to CO line calls, intercom calls, or both. (® 6.1.7 FWD/
DND Button, Group FWD Button)
Used to set the FWD feature for a specified ICD group. The feature
is applied to CO line calls, intercom calls, or both. (® 6.1.7 FWD/
DND Button, Group FWD Button)
Used to enter an account code. (® 1.1.2 Account Code Entry)
Used to establish a multiparty conversation. (®
3.1.16 Conference)
Used to disconnect the current call and make another call without
hanging up. (® 6.1.2 Flash/Recall/Terminate)
Used to send a flash/recall signal to the telephone company or host
PBX to access external features. (® 5.1.1 EFA (External Feature
Access))
Used to park or retrieve a call in a preset PBX parking zone. (®
3.1.5 Call Park)
6.1.3 Flexible Buttons
Usage
Feature Manual 109