Page 2
This document describes the configuration procedures required for the KX-TDA50 to make full use of the capabilities of Cbeyond SIP Trunks Services. The KX-TDA50 is one of Panasonic platforms that support SIP trunks functionality. It implements the Session Initiation Protocol (SIP) through a dedicated (Trunk) Gateway card (KX-TDA5450) which offers 4-Channels of SIP trunks.
Architecture Overview The following diagram illustrates simple VOIP networks connecting the SIP-GW4 card: The Case of Cbeyond Setup: Cbeyond will provide its services over a dedicated Circuit terminated at the CPE device 7/17/2009 Revision 2...
Page 4
Basic SIP-GW Settings for Cbeyond 1-Starting the SIP-GW4 Maintenance Utility To start the SIP-GW4 Maintenance Utility, log in from your PC connected to the card by specifying the default IP address, username, and password. 1. Start Internet Explorer from the Start menu. 2.
Page 5
Fixed IP Address Configuration Assign each parameter, based on the information provided by the ITSP (Cbeyond), Note Do not assign an IP address and a subnet mask address from the same network as the LAN port, for example: LAN port: IP address 192.168.0.1, Subnet mask 24 (255.255.255.0) WAN port: IP address 192.168.0.2, Subnet mask 24 (255.255.255.0) If you do so, disconnect the cables from the LAN and WAN ports and reboot the SIP-GW4 card.
Page 6
SIP Telephony Basic Settings, is complete. SIP Telephony Basic Settings 1-System Level Configuration: This section describes system-wide configuration items that are generally required for each KX-TDA50 to work with Cbeyond. *Operation Menu 1.2 SIP settings 1.2.1 Channel and SIP Telephony Step Command...
Page 7
*Operation Menu 1.2 SIP settings 1.2.4 Options Step Command Purpose Specifies whether the PRACK Step 7 Enable PRACK (“100rel” option). feature is enabled or disabled. Specifies whether Session Timer is Step 8 Enable Session Timer. enabled or disabled. Specifies the length of time that Step 9 Set Session Timer(Offer).
2-Subscriber Level Configuration Parameters This section identifies the SIP service subscriber-specific parameters, including registration and authentication. These settings must be unique for each account. Provisioning a subscriber to register with Cbeyond allows calls to terminate to the subscriber’s line. Registration requires that a unique address of record (AoR) is provisioned on Cbeyond Application server cluster.
2- Update your PCMC (Maintenance Tool) with the latest version available on the BTS website and through Panasonic Tech support department 3- Back up your configuration file with the Good known settings...