Service
Caller ID
3.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Conditions
•
En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
–
the # key is pressed (programmable).
4.17 [2-9] System Options—Option 2—
(KX-TDA100/KX-TDA200/KX-TDA600 only)
–
the dialed number is a preprogrammed telephone number.
5.4 [3-1-4] Dialing Plan
–
the inter-digit timer expires.
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
•
Extension Number
An extension number can be assigned to each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
•
Network Type
Each ISDN port can be set to the requirements of each country/area.
•
L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) for each ISDN port.
•
TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected for each ISDN port.
•
Bearer Mode
The bearer mode can be assigned for each ISDN port.
6.1 [4-1-1] Wired Extension—Extension Settings—Option 6—
KX-TDA600 only)
6.10 [4-2-1] Portable Station—Extension Settings—Option 6—
PC Programming Manual References
3.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.15 [1-1] Slot—Port Property - PRI Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.17 [2-9] System Options—Option 2—
KX-TDA200/KX-TDA600 only)
6.1 [4-1-1] Wired Extension—Extension Settings
→Main—
Extension Number
→Option 6—
ISDN Bearer (KX-TDA100/KX-TDA200/KX-TDA600 only)
6.10 [4-2-1] Portable Station—Extension Settings—Option 6—
5.5 [3-1-4] Dialing Plan—Auto Assign
Document Version 2010-11
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Description
The PBX receives Caller ID information, such as
the caller's name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
End of Dial Plan—[#] as End of Dial for en Bloc mode
End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-TDA100/
® 3.1.1 Caller ID
Dial—Extension Inter-digit
Extension Number
ISDN Bearer (KX-TDA100/KX-TDA200/
ISDN Bearer
Dial—Extension Inter-digit
ISDN Bearer
Details in
Feature Manual
175