Panasonic KX-TDA50 Feature Manual page 54

3.1.13 CLIP (Calling Line Identification Presentation)
Conditions
•
CLIP, COLP, CLIR, and COLR are only available for the KX-TDA100, KX-TDA200, and KX-TDA600.
•
The availability of this feature is dependent on the contract with the telephone company.
•
The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
•
COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
•
CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customized as the CLIR or COLR button.
•
The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
•
When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (® 13.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/
Connected Line Identification Presentation) and CNIP/CONP (Calling/Connected Name Identification
Presentation))
PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→CO Setting—
→Supplementary Service—
CCBS, E911
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
4.8 [2-6-1] Numbering Plan—Main—Features
→ COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension (KX-TDA100/KX-TDA200/KX-TDA600 only)
4.17 [2-9] System Options—Option 4—
Party)
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—
KX-TDA200/KX-TDA600 only)
6.1 [4-1-1] Wired Extension—Extension Settings
→Main— Extension Number
→Option 1— CLIP ID
→Option 3— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
→Option 3— CLIR
→Option 3— COLR
6.5 [4-1-4] Wired Extension—Flexible Button—
6.10 [4-2-1] Portable Station—Extension Settings
→Option 1— CLIP ID
→Option 3— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
→Option 3— CLIR
→Option 3— COLR
6.13 [4-2-3] Portable Station—Flexible Button—
6.18 [4-3] DSS Console—
PT Programming Manual References
[003] Extension Number
[606] CLIP Number
54 Feature Manual
Subscriber Number
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Type
CLIP on G-DN Button (KX-TDA100/
Type
Type
Subscriber Number
Document Version 2010-11