[2]
5.3.2 Cassette Pickup Roller
5.3.2.1 Removing the Cassette Pickup Roller
1) Open the document feeder tray.
2) Open the cartridge cover.
3) While pushing the 2 claws [1] outward, detach the pickup roller [2].
[1]
5.3.3 Cassette Pickup Solenoid
5.3.3.1 Preparation for Removing the Cassette Pickup
Solenoid
1) Remove the document feed tray and the paper tray cover. (page 7-2)Ref-
erence[Removing the Document Feed Tray and the Paper Tray Cover]
2) Detach the right cover. (page 7-2)Reference[Detaching the Right Cov-
er]
3) Detach the left cover. (page 7-2)Reference[Detaching the Left Cover]
4) Detach the rear cover. (page 7-1)Reference[Detaching the Rear Cover]
5.3.3.2 Removing the Cassette Pickup Solenoid
1) Remove the 2 flat cables [1].
2) Disconnect the 8 connectors [2].
3) Remove the 6 screws [3], and detach the SCNT board [4].
4) Free the harness [6] from the clamp [5].
5) Remove the screw [7], and detach the Speaker [8].
[6]
[5]
[1]
[3]
[2]
[8]
[7]
6) Remove the 4 screws [1], and detach the side plate [2].
[1]
[1]
F-5-5
[2]
F-5-6
[4]
[1]
[3]
[2]
[3]
F-5-7
0018-4187
7) Remove the 4 screws [1], and detach the gear side plate [2].
8) Remove the screw [1], and detach the Pickup solenoid [2].
0018-4188
0018-4189
5.3.4 Cassette Separation Pad
5.3.4.1 Removing the Cassette Separation Pad
1) Remove the 2 screws [1], and detach the Separation pad [2].
Chapter 5
[2]
[1]
F-5-8
[2]
[1]
[1]
F-5-9
[1]
[2]
F-5-10
[1]
[2]
[1]
F-5-11
0018-4191
5-3