Safety Instructions - Ask Proxima E2465 User Manual

Safety Instructions

Please read this manual completely before
installing and operating the projector.
The projector provides many convenient features
and functions. Proper operation may enable you
to fully utilize the features and keep it in good
condition. Otherwise, it will not only shorten
the service life of the unit, but also may cause
malfunction, a fire, or other accidents.
If your projector cannot work properly, please read
this manual again, check the operating methods
and cable connection, and try the solutions in the
part of Troubleshooting. If the problem still exists,
contact the dealer or the service center.
The lamp of the projector is a wearing part.
The luminance may decrease after a period of
operation and be weaker than that of a new lamp.
This is normal. Please strictly follow the steps in
Turning on the unit and Turning off the
u n i t t o t u r n o n / o ff t h e p r o j e c t o r, a n d t h e
requirements in Maintaining and cleaning the
projector to service and clean the projector
regularly. Or the high temperature residual heat
may not radiate, greatly shortening the service life
of the projector and lamp, or even damaging them
within a short period.
Caution
ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK NO
USER SERVICEABLE PARTS INSIDE EXCEPT
LAMP REPLACEMENT. REFER SERVICING TO
QUALIFIEDSERVICE PERSONNEL.
T H I S S Y M B O L I N D I C A T E S
T H A T D A N G E R O U S V O L T A G E
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS
UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
USER'S MANUAL WITH THIS UNIT.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU
countries and do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials
and components which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed of
separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical
symbol means that the battery or accumulator contains a heavy metal
at a certain concentration. This will be indicated as follows: Hg: mercury,
Cd: cadmium, Pb: lead In the European Union there are separate
collection systems for used electrical and electronic
equipment, batteries and accumulators.
Please, dispose of them correctly at your
local community waste collection/recycling centre.
Please help us to conserve the environment we
live in!
4
Safety precautions
Caution: • The projector must be grounded.
• Do not expose the projector to
raindrops or high humidity to avoid
a fire or electric shock.
- This projector produces intense light from the
projection lens. Avoid staring directly into the
lens, otherwise eye damage could be caused.
Be especially careful that children do not stare
directly into the beam.
- Place the projector in a proper position.
Otherwise it may result in fire hazard.
- Leave an appropriate space from the top,
sides, and back of the shell in order to
ventilate and cool down the projector. The
figures below indicate the minimum distance
to be left. It must be satisfied if the projector is
placed in sealed environment like a cabinet.
SIDE and TOP
0.7'(20cm)
1.5'(50cm)
3'(1m)
- Do not cover the vent of the projector. Poor
radiation may shorten the service life or even
cause dangers.
- Remove the AC power plug if the projector
is not to be used for a long time.
- Do not project the same image for a long time;
otherwise, a residual image may appear on
the LCD panel due to its characteristic.
Caution
Do not set the projector in greasy, wet, or smoky
conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes
in contact with oil or chemicals, it may become
deteriorated.
Read and keep this manual for future reference.
F2003 information: 2.5A 250V
The mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall
remain readily operable.
Environment-friendly use conditions: The environment-
friendly life time of the projector and remote control is 10
years, the lamp (consumable) 5 years, and the provided
10
batteries (consumable) 5 years.
The use conditions of the environment-friendly use period
are the same with that of the product. Properly operate and
effectively maintain the projector according to the requirements
in this manual.
REAR
3'(1m)