Computer input
Input select(Analog)
Direct operation
Press INPUT button on side control panel
or remote control to select VGA1, VGA2 or
RGBHV.
Remote control
INPUT button
Menu operation
1 Press MENU button on remote control to
display the screen menu. Press button
to select Input icon, then press button or
OK button.
2 Press button to select VGA 1, VGA 2 or
RGBHV, then press OK button.
When input source is from
VGA 1
computer connected to
CONPUTER IN 1 terminal with
VGA cable, please select VGA 1.
When input source is from
VGA 2
computer connected to
CONPUTER IN 2/MONITOR
OUT terminal with VGA cable,
please select VGA 2.
When input source is from
RGBHV
computer equipment connected
to BNC terminal with BNC*5
cable, please select RGBHV.
Note:
When the Input Search function is set to On in the Auto setup function, the input signal will be
searched automatically.
28
Side control
VGA 1
VGA 2
RGBHV
Note:
VGA2 can not be selected when using the
COMPUTER IN 2/ MONITOR OUT terminal as
MONITOR OUT output.
Input menu
Input
HDMI 1
HDMI 2
HDMI 3
Display Port
DVI
VGA 1
VGA 2
Component
S-Video
Video 1
Video 2
- - - -
Exit
Move
Input
RGBHV
SCART
Network
Card Reader
USB Autorun
System
- - - -
Exit
Move
INPUT
button
Input
Next
Next
1024x768@60
Next
Next