Computer System Select - Ask Proxima E2465 User Manual

Computer input

Computer system select

The projector automatically tunes to various types of computers with its function of Multi-scan system and
Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the
signal format and tunes to project proper images without any additional setting.
One of the following messages may appear when:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided PC systems, Auto is
displayed on the System Menu box
and the Auto PC Adjustment function
works to display proper images. If
the image is not projected properly, a
manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between your
computer and projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the top contro or remote
control to display the on screen menu.Press

button to select the input source icon, and

press or OK button.

2 Press button to select System and press
the ► or OK button.

3 Press button to select your required
system, and then press the OK button.
√ Note:
When HDMI 1, HDMI 2, HDMI 3, Display Port or DVI is selected, System menu is disable.
30
VGA system menu
Input
RGBHV
SCART
Network
Card Reader
USB Autorun
System
- - - - Move
Exit
The PC system menu displays the selected
system.
Input
Syetem
1024x768@60
1366x768@60
- - - -
- - - -
- - - -
- - - -
Move
Exit
Auto
Next
Next
RGB(Computer1)
Next
Next