Input Select - Ask Proxima C500 Series Manual

Input select

Direct Operation
Press Computer 1, Computer 2, HDMI,
Component, Video, S-video, Network, Memory
Viewer or USB Display on remote control as
input source.
Menu operation
1 Press INPUT button on side control to display
the input select menu.
2 Press  button to select Computer 1,
Computer 2, HDMI, Component, Video, S-video,
Network, Memory Viewer or USB Display,
then press OK button.
Computer 1
Computer 2
HDMI
Component
Video
S-video
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal will
be searched automatically.
- When COMPUTER IN 2/COMPUTER OUT terminal is used as COMPUTER OUT, Computer 2
can not be selected.
Downloaded From projector-manual.com ASK Manuals
When input source is from
computer connected to
CONPUTER IN 1 terminal
with VGA cable, please select
"Computer 1".
When input source is from
computer connected to
CONPUTER IN 2/COMPUTER
OUT terminal with VGA cable,
please select "Computer 2".
When input source is from
equipment connected to HDMI
terminal with HDMI cable,
please select "HDMI".
Select it when the input source
is from the video equipment
connected to YCbCr IN terminal.
Select it when the video input
signal is connected to VIDEO
terminal.
Select it when the video input
signal is connected to S-VIDEO
IN terminal.
Side control
INPUT button
Remote control
HDMI
button
VIDEO
button
Input select menu
Computer 1
Computer 2

HDMI
Component
Video
S-video
Network
Memory Viewer
USB Display
Basic operation
COMPONENT 1
COMPONENT 2
S-VIDEO
COMPONENT
button
29