DIN RADIO PROVISION WITH POCKET
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Cut and remove the top (2) mounting
holes off of the radio housing.
Note: The notch in the housing
should be on top. (Figure A)
2
Slide the included brackets onto the
sides of the radio housings pocket
from the back of the housing
forward. (Figure B)
3
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure C)
4
Slide the aftermarket head unit into
the cage and secure. (Figure D)
Continue to final assembly.
D
99-5819 KIT ASSEMBLY
A
B
C
2
CUT HERE -TOP LEG ONLY
CUT
CUT HERE -TOP LEG ONLY
CUT