Din Head Unit Provision - Metra Electronics 99-5721 Installation Instructions Manual

DIN HEAD UNIT PROVISION

1 Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Fig. A)
2
Snap the pocket into the bottom
opening of the radio housing. (Fig. B)
3
Slide the aftermarket head unit into
the cage and secure. (Fig. C)
4
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
5 Plug the jumper harness into the car
side of the climate control plug and
the other side into the kit.
Reassemble dash in reverse order
6
of disassembly.
99-5721 KIT ASSEMBLY
5
A
B
C