Table of Contents
Advertisement
screen will then be displayed and the cursor will appear and blink. It will be
located in the 1st location on the top row.
2. To modify the text :
A. Use the FAN buttons to move the cursor forward or back. The
location where the cursor is blinking is the location that the character
may be changed.
•
FAN DOWN = Move Cursor ahead one location
•
FAN UP = Move Cursor back one location
B. To change the character where the cursor is currently blinking use the
TEMP buttons to progress through the character set.
•
TEMP UP
•
TEMP DOWN = Show the previous character
3. To exit this mode:
A. Do not press ANY buttons for 15 seconds and it will timeout
automatically.
B. Press button other than the 4 mentioned above.
4. To erase any changes made to the default display – Press and hold down the
recirculation button button for 15 seconds. The "TAURUS" will once again be
the default display.
NOTE : Characters are saved into memory immediately whenever changes are
made.
NOTE : While in this mode – no other display items will be updated.
99-5721 KIT ASSEMBLY
= Show the next character
9
Advertisement
Table of Contents
