Advertisement
Available languages
Available languages
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-5026
Ford Expedition (w/o NAV) 2003-2006
Lincoln Navigator (w/o NAV) 2003-2006
Mercury Mountaineer 2002-2005
99-5026
KIT FEATURES
• DIN head unit provision with pocket
• ISO DIN head unit provision with pocket
KIT COMPONENTS
A) Radio Housing B) ISO Brackets C) Rear Support Bracket D) ISO Trimplate E) (1) #8 X 3/8" Phillips Truss Head Screw
A
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
APPLICATIONS
Ford Mustang 2001-2004
Ford Explorer 2002-2005
Lincoln Aviator 2002-2005
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-5519 - Ford amplified harness 1998-08
• 70-5520 - Ford harness 2003-up
• 70-5521 - Ford amplified harness 2003-up
• 70-1771 - Ford harness 1998-up
Antenna Adapter:
• Not required
TOOLS REQUIRED:
Phillips Screwdriver • Socket wrench
www.metraonline.com
C
D
E
Advertisement
Related Manuals for Metra Electronics 99-5026
Summary of Contents for Metra Electronics 99-5026
- Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-5026 Ford Mustang 2001-2004 Ford Expedition (w/o NAV) 2003-2006 Ford Explorer 2002-2005 Lincoln Navigator (w/o NAV) 2003-2006 Lincoln Aviator 2002-2005 Mercury Mountaineer 2002-2005 99-5026 KIT FEATURES • DIN head unit provision with pocket • ISO DIN head unit provision with pocket KIT COMPONENTS A) Radio Housing B) ISO Brackets C) Rear Support Bracket D) ISO Trimplate E) (1) #8 X 3/8”...
- Page 2 99-5026 T ABLE OF CONTENTS Dash Disassembly ........1-5 Kit Assembly .
- Page 3 99-5026 FORD MUST ANG 2001-2004 Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove shift lever trim panel. (Figure A) Unclip and remove the entire panel surrounding the radio and climate controls including the vents.
- Page 4 99-5026 FORD EXPEDITION 2003-2006 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) 9/32” screws from above instrument cluster. (Figure A) Unclip and remove entire panel sur- rounding radio, climate controls, and instrument cluster. (Figure B) Remove (2) 9/32”...
- Page 5 99-5026 DASH DISASSEMBL Y FORD EXPLORER 2002-2005 MERCURY MOUNT AINEER 2002-2005 Disconnect the negative battery ter- minal to prevent an accidental short circuit. Unclip and remove entire panel sur- rounding radio including climate con- trols and vents. (Figure A) Remove (2) 9/32” screws securing...
- Page 6 99-5026 LINCOLN NAVIGA TOR 2003-2006 Disconnect the negative battery ter- minal to prevent an accidental short circuit. Open center console and remove (1) push pin from back of power window switch panel. (Figure A) Unclip and remove panel. Remove (2) 9/32” screws exposed on shifter panel then unclip and move shifter panel off to side.
- Page 7 99-5026 LINCOLN AVIA TOR 2003-2005 Disconnect the negative battery ter- minal to prevent an accidental short circuit. Unclip and remove vent panel above radio on top of dashboard. (Figure A) Remove (2) 9/32” screws exposed under panel removed in step 1.
- Page 8 99-5026 DIN HEAD UNIT PROVISION WITH POCKET Slide the DIN cage into the housing and secure by bending the metal locking tabs down. (Figure A) Slide the aftermarket head unit into the cage and secure. Snap the trim- plate into the radio housing.
- Page 9 99-5026 ISO DIN HEAD UNIT PROVISION WITH POCKET Snap the trim plate into the radio housing. Attach the ISO brackets to the inner lip of the housing. (Figure A) Slide the head unit/bracket assembly into the radio opening and align the...
- Page 10 99-5026 FINAL ASSEMBL Y 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)
- Page 11 INSTRUCCIONES DE INSTALACIÓ N PARA LA PIEZA 99-5026 Ford Exp e d ition (w /o NAV ) 2003-2006 Lin c oln Nav ig ator (w /o NAV ) 2003-2006 99-5026 CARACTERÍSTICAS DEL KIT • Accesorio para unidades centrales DIN con bolsillo •...
- Page 12 99-5026 I NDICE Desmontaje del tablero ......1-5 Montaje del kit ........6-7 Montaje final .
- Page 13 99-5026 FORD MUSTANG 2001-2004 Desconecte el terminal negativo de la batería, a fin de evitar un cortocir- cuito accidental. Desenganche y retire el panel de ter- minación de la palanca de veloci- dades. (Figura A) Desenganche y retire todo el panel...
- Page 14 99-5026 FORD EXPEDITION 2003-2006 Desconecte el terminal negativo de la batería, a fin de evitar un cortocir- cuito accidental. Retire (2) tornillos de 9/32 in que se encuentran arriba del grupo de instrumentos. (Figura A) Desenganche y retire todo el panel...
- Page 15 99-5026 DESMONTAJE DEL TABLERO FORD EXPLORER 2002-2005 MERCURY MOUNTAINEER 2002-2005 Desconecte el terminal negativo de la batería, a fin de evitar un cortocir- cuito accidental. Desenganche y retire todo el panel que rodea el radio, incluidos los con- troles de clima y las rejillas de venti- lación.
- Page 16 99-5026 LINCOLN NAVIGATOR 2003-2006 Desconecte el terminal negativo de la batería, a fin de evitar un cortocir- cuito accidental. Abra la consola central y retire (1) tachuela de la parte posterior del panel de interruptores del alza- cristales. (Figura A) Desenganche y retire el panel.
- Page 17 99-5026 LINCOLN AVIATOR 2003-2005 Desconecte el terminal negativo de la batería, a fin de evitar un cortocir- cuito accidental. Desenganche y retire el panel de la rejilla de ventilación que se encuentra arriba del radio, en la parte superior del tablero. (Figura A)
- Page 18 99-5026 ACCESORIO PARA UNIDADES CENTRALES DIN CON BOLSILLO Deslice la caja DIN en el alojamiento y sujétela doblando las lengüetas de cierre de metal hacia abajo. (Figura A) Deslice la unidad central de posven- ta en la caja y sujétela. Coloque a presión la placa de terminación en el...
- Page 19 99-5026 ACCESORIO PARA UNIDADES CENTRALES DIN ISO CON BOLSILLO Coloque a presión la placa de termi- nación en el alojamiento del radio. Coloque los soportes ISO en el rebor- de interno del alojamiento. (Figura A) Deslice el conjunto de la unidad cen-...
- Page 20 99-5026 MONTAJE FINAL 1 Ubique el arnés del cableado de fábrica en el tablero y realice las conexiones como se muestra. Metra recomienda usar el adaptador de acoplamiento adecuado y realizar las conexiones como se muestra. (Aísle y encinte individualmente los extremos de cualquier cable que no esté...